Home Renovations Tranent: Structure to Finish
Home Renovations Tranent: Structure to Finish
Blog Article
A Renovation Run by One Team in Cockenzie and Port Seton
George Herkes & Son Joinery (Est. 1989), a family run joinery firm based in Tranent, East Lothian, covers home renovation in Cockenzie and Port Seton and the rest of East Lothian. Removing a wall between two rooms is a beam calculation. A structural engineer sizes the beam, and one team does the structure and the finishing.
Can the wall between two rooms be taken out?
It often can, once the load it carries has been worked out. In many older houses the dividing wall carries load from above. Nothing is cut until the span, bearings and load are known.
Steel or engineered timber sizing comes from a structural engineer, and padstones are set on solid bearing. Structure, joinery and finishing then stay with one George Herkes & Son Joinery (Est. 1989) team, which stops the finishing stalling while someone else catches up.
What is the 27 rule for stairs?
It is a rule of thumb rather than a regulation. In Scotland a new stair is set out to the building standards, which limit how tall each riser and how deep each tread may be, and also cover George Herkes & Son Joinery (Est. 1989) Tranent pitch, headroom, handrails and balustrade gaps. A replacement stair is drawn to those standards before any timber is cut.
Is it the same team from survey to handover in Cockenzie and Port Seton?
As the name says, George Herkes & Son Joinery (Est. 1989) is a father and son firm. Design, manufacture and installation stay in house, and no job is passed along to a firm you have not met.
Whoever measures the room is the one who installs the work. George answers the questions, not a call centre. Decisions get made by someone who has seen the room.
Why do loft floors need new joists?
Head height under the ridge is the first thing measured, and it settles most of the conversation. Older ceiling joists were sized for a ceiling, not for people walking on them, which is why new joists are fitted beside the old ones. Tanks, chimney breasts and the stair below are all recorded on the first visit.
Many conversions sit within permitted development, though that depends on the property. George Herkes & Son Joinery (Est. 1989) checks it against your address rather than guessing. Building standards approval is separate and applies either way, covering structure, stair, insulation and escape.
For home renovation in Cockenzie and Port Seton, George Herkes & Son Joinery (Est. 1989) will come out and measure first. Call 07860 211 815 for home renovation.
George Herkes & Son Joinery (Est. 1989)
14 Carlaverock Cl, Tranent EH33 2PP, United Kingdom
Phone: 07860 211 815
Website: ghsjoinery.co.uk
Call 07860 211 815 to arrange a survey and a free quote.